Model the construction
Describe conductors, insulation, screens and sheaths once — the structure becomes a versioned product definition.
Add-on
CablePLM
Standards-driven cable design that rolls straight into cost
Design cable constructions to standards, generate cross-sections, and roll materials and cost directly into the BOM.
عند الطلب
Available forProAdvancedEnterprise
What you get
- Standards-driven cable design
- 2D / 3D cross-sections
- Material and cost roll-up into BOM
- Revision control
- Hand-off to production
- Layer-by-layer construction: conductor, insulation, screen, armour, sheath
كيف يعمل
CablePLM, step by step
حوّل هندسة الكابلات وضفائر الأسلاك إلى بيانات منتجات قابلة لإعادة الاستخدام وتراعي التكاليف.
Generate BOM and routing
Materials, weights and process steps are calculated from the construction instead of retyped in spreadsheets.
Cost and quote instantly
Copper, polymer and labour rates flow into the cost model, so a quote reflects today's prices, not last quarter's.
Release to production
Approved revisions are pushed to production orders and technical data with a full change history.
See CablePLM running on your own process
Book a 30-minute session — we walk these steps through with your data and give you a rollout estimate for CablePLM.
Capabilities
Everything inside CablePLM
Standards-driven cable design
2D / 3D cross-sections
Material and cost roll-up into BOM
Revision control
Hand-off to production
Layer-by-layer construction: conductor, insulation, screen, armour, sheath
2D cross-section and 3D preview generated from the configuration
Consumption norms and tolerances per layer feed the BOM automatically
LME-linked metal cost base for instant re-quoting
Design revisions handed over to production under version control
Design that already knows the cost
CablePLM keeps the cable construction, its standards compliance and its economics in one model. Every layer you add is a material, a weight and a cost — not just a drawing.
What it does
- Standards-driven construction of cable designs
- 2D and 3D cross-section generation
- Material and cost roll-up into the BOM
- Revision control over constructions
- Clean hand-off of the approved revision to production
Design is driven by standards and material data, not by redrawing: conductor, insulation, screen, armour and sheath are configured layer by layer, each with its own material, tolerance and consumption norm. The 2D cross-section and 3D preview update as you configure, and the resulting structure becomes a real BOM with routing and cost — so a quotation reflects the cable you would actually manufacture. Metal content is priced against the current LME base, so re-quoting after a price move is a recalculation rather than a project.
الأسئلة الشائعة
CablePLM — frequent questions
Short answers to what teams ask before switching this module on.